Eaton 93PM Series - Integrated Accessory Cabinet-Distribution; Sidecar Integrated Accessory Cabinet-Bypass; Sidecar Integrated Accessory Cabinet-Tie; Sidecar Integrated Accessory Cabinet-Tie Bypass

Eaton 93PM UPS 480V Three-Wire – 100 kW Frame Installation and Operation Manual 164000227—Rev 07 43
34. Locate the black cover dots from the parts kit and install over the left and right side bracket mounting
holes.
35. Proceed to paragraph 4.3 Integrated Battery Cabinet Installation.
Figure 16. Removing the Sidecar Rear Shipping Bracket – Eaton 93PM UPS
Rear Shipping
Bracket
44..33 IInntteeggrraatteedd BBaatttteerryy CCaabbiinneett IInnssttaallllaattiioonn
If installing Integrated Battery Cabinets (IBCs), refer to the Eaton 93PM Integrated Battery Cabinet Installation
Manual Large and Large High Rate, the Eaton 93PM Universal Integrated Battery Cabinet Installation Manual-
Large and Large High Rate, or the Eaton 93PM Integrated Battery Cabinet-Small Welded IBC-SW (432V and
480V) Installation Manual, listed in paragraph 1.8 For More Information, for installation instructions.
After the IBC is installed, proceed to paragraph
4.4 Sidecar Integrated Accessory Cabinet-Bypass Wiring Installation if a Sidecar Integrated Accessory Cabinet-
Bypass (SIAC-B) is attached to the UPS, or to paragraph
4.5 Sidecar Integrated Accessory Cabinet-Tie Wiring Installation if a Sidecar Integrated Accessory Cabinet-Tie
(SIAC-T) is attached to the UPS, or to paragraph
4.6 Sidecar Integrated Accessory Cabinet-Tie Bypass Wiring Installation if a Sidecar Integrated Accessory
Cabinet-Tie Bypass (SIAC-TB) is attached to the UPS, or to paragraph 4.7 Integrated Accessory Cabinet-Tie if
installing an Integrated Accessory Cabinet-Tie (IAC-T), or to paragraph
4.8 Integrated Accessory Cabinet-Distribution if installing an Integrated Accessory Cabinet-Distribution (IAC-D);
otherwise, proceed to paragraph 4.9 External AC Power Wiring Installation to complete the wiring of the UPS.
UPS System Installation