Eaton 93PM Series - Figure 60. Sign in Password Screen; Figure 61. Sign in Keypad

96 Eaton 93PM UPS 480V Three-Wire – 100 kW Frame Installation and Operation Manual 164000227—Rev 07
1. Tap the lock button in the upper right corner of the screen. The sign in screen is displayed (see Figure 60).
2. Tap the password entry area on the screen.
3. Enter the password using the keypad displayed and tap the return key (see Figure 61).
Level 1 default password is 1111. Settings Level 2 default password is 0101.
4. Sign in is complete. Tap continue to return to previous screen.
Figure 60. Sign In Password Screen
Figure 61. Sign In Keypad
UPS Operating Instructions