88 Eaton 93PM UPS 480V Three-Wire – 100 kW Frame Installation and Operation Manual 164000227—Rev 07
Figure 49. Parts of the LCD
A Status Bar displays the UPS name, UPS state, current date and time, meter information, active alarms and
notices, and a sign in/sign out button. For more information about alarms and notices, see paragraph
7.2.2 System Events.
B Main Menu Navigation Bar displays main menu functions and selections as tab buttons. To select a screen
function touch the tab name.
C Secondary Menu Navigation Bar displays functions and selections related to the current screen as tab
buttons. To select a screen function touch the tab name.
D Information Area contains status data, operational controls, acknowledgments, action confirmations, and
screen prompts.
You can use the LCD touch screen to:
• Look at a log of UPS events (alarms, notices, and commands) (see paragraph
7.2.6 Display Menu Operation)
• Monitor UPS operation (see paragraph 7.2.6 Display Menu Operation)
• Set UPS parameters (see paragraph 7.2.6 Display Menu Operation)
• Control UPS operation (see paragraphs 7.2.6 Display Menu Operation and 7.2.8 System Controls)
77..22..44 UUssiinngg tthhee MMeennuu
The UPS navigation tab menu bar allows you to display data in the information area to help you monitor and
control UPS operation. Table 21 shows the basic menu structure.
UPS Operating Instructions
To Next Page
Loading...
