Eaton DF6100 - Page 3

3INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
Enable/disable (others menu) .........................................40
Enable/disable .....................................................41
Lamp test ........................................................43
Weekly test .......................................................44
Installation instructions for: Single channel input unit MCIM-C ...............45
Viewing events ....................................................47
Check auto config ..................................................48
Replace device ....................................................49
Test device (access level 3) ..........................................50
Test zone .........................................................51
Sounder level test mode .............................................52
Global flashing LED on/off ...........................................53
One man walk test .................................................54
Commission: Load CDR from laptop ...................................55
Commission: Download CDR to laptop .................................56
Commission: Auto learn .............................................57
Erase log .........................................................58
System details ....................................................59
Load logo from PC .................................................60
Analogue level .....................................................61
Change panel number ...............................................62
Number of panels in network .........................................63
Screen cover ......................................................64
Italian mode ......................................................65
Programming I/O and sounders T1 .....................................66
Programming I/O and sounders T2 .....................................67
Programming I/O and sounders. Panel outputs ...........................68
Programming I/O and sounders. Auxiliary board ..........................69
Programming I/O and sounders alarm verification .........................70
Sound settings ....................................................71
Change date/time ..................................................72
Change zone text ..................................................73
Change text .......................................................74
Change panel text ..................................................75
Configure zones ...................................................76