16 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 1: System installation and design
AUX 2
Max Load : 60 mA
Fused (PTC3) : 1.1A polyswitch
Fault routing equipment
Max Load : <10 mA
Fused (PTC1) : 100mA polyswitch
End of Line resistor : 2K
Auxiliary 24V supply
Nominal Voltage : 24 Volts ±10%
Fuse (PTC5) : 100 mA Polyswitch
Maximum current : 30 mA
This output is not to be used for Fire protecting equipment or Fire alarm routing
Equipment.
Any power taken from the alarm system will effect the standby duration.
Mechanical specification
Weight including batteries : 9 Kg
Weight excluding batteries : 4 Kg
Dimensions (Standard batteries) : 395mm(L) x 270mm(H) x 115mm(D)
Type of Material (backbox) : Mild Steel (Power Coated)
Type of Material (Facia) : PC/ABS
Flammability Rating : UL 94 V0
Total Number of knockouts : 11
Diameter of Knock out : 20mm
TERMINAL BLOCKS : DO NOT USE EXCESSIVE FORCEWHEN TIGHTENING THE
SCREWS ON THE TERMINAL BLOCK
To Next Page
Loading...
