Eaton DF61002 - System Configuration and Commissioning

55INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Commission: Load CDR from laptop
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Commission.
Select “Load CDR from Laptop” from the CommissionMenu”
After pressing “Yes” click “Retrieve Database From Panel” on the PC download
software.
Important: Do not click “Retrieve Database From Panel” pressing “Yes” on the
“Load CDR” screen.
Load CDR from Laptop
This will erase the current CDR
Do you want to continue?
Yes
No
Load logo from PC
Load CDR from Laptop
Download CDR to Laptop
Auto Learn
Erase Log and Reset
Analogue Level
Printer Settings
Change Panel Number
Number of Panels
in Network
Italian Mode
System Detail
Screen Cover
Service
FRE Off
Mute
Buzzer
Reset
Configure
Enable / Disable Address
Commission
Test
Mute
Buzzer
Reset
Service
FRE Off
Exit
Load CDR from Laptop
This will erase the current CDR
Do you want to continue?
Yes
No
Load logo from PC
Load CDR from Laptop
Download CDR to Laptop
Auto Learn
Erase Log and Reset
Analogue Level
Printer Settings
Change Panel Number
Number of Panels
in Network
Italian Mode
System Detail
Screen Cover
Service
FRE Off
Mute
Buzzer
Reset
Configure
Enable / Disable Address
Commission
Test
Mute
Buzzer
Reset
Service
FRE Off
Exit
Load CDR from Laptop
This will erase the current CDR
Do you want to continue?
Yes
No
Load logo from PC
Load CDR from Laptop
Download CDR to Laptop
Auto Learn
Erase Log and Reset
Analogue Level
Printer Settings
Change Panel Number
Number of Panels
in Network
Italian Mode
System Detail
Screen Cover
Service
FRE Off
Mute
Buzzer
Reset
Configure
Enable / Disable Address
Commission
Test
Mute
Buzzer
Reset
Service
FRE Off
Exit