Eaton DF61002 - Mute Buzzer; Reset

38 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Mute buzzer
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode and Select “Mute Buzzer” from the Top Menu.
Reset
Enter the Supervisor Mode and Select “Reset” from the top Menu. Select “Yes” to
reset the panel.
Supervisor
FRE Off
Evacuate
Fires
AC = 0
Enable/Disable
Print
Lamp test
Send analogue values to PC
View Log
Check Config
Weekly Test
Send Log to PC
View Pre
Alarms
View
Disabled
View
Faults
Others
Silence
Alarms
Mute
Buzzer
Reset
Supervisor
FRE off
Evacuate
View Fires
AC = 19
001 14:22:49
Mains Failure
View Pre
Alarms
View
Disabled
This will Reset the Panel
Do you want to continue?
View
Faults
Faults = Short circuits, broken detectors etc.
To remove faults from this list:
1) Fix Fault
2) Reset Panel
Others
Yes
No
Silence
Alarms
Mute
Buzzer
Reset