Eaton DF61002 - Configure Zones

76 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Configure zones
Enter the Service Mode and Select Configure. Select “Configure Zones”.
Select Zone into which device will be added.
Service
FRE Off
Exit Reset
Programming I/O
and Sounders
Change Date/Time
Change Text
Add Zone
Add Device
Delete Zone
Delete Device
Mute
Buzzer
Change Password
Day/Night
Configure Zones
-
-
Touch the dash to
move the device into
the selected zone.
001 Device 1, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
002 Device 2, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
003 Device 3, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
004 Device 4, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
005 Device 5, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
Exit
Goto
Reset
Show
Detectors
Show
Alarms
Show
I/O Units
Show
Selected
In Zone
Service
FRE Off
Show
All
In Zone
In Zone
Zone 002 Zone 2
Zone 003 Zone 3
Zone 004 Zone 4
Touch row to configure
Exit
Reset
Service
FRE Off
Zone 001 Zone 1