Eaton DF61002 - Delete Device

81INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Delete device
Enter the Service Mode and Select Configure, select “Add/Delete”
then “Delete Device”.
Select a Device to Delete.
Confirm or Cancel Deletion.
Touch row to delete
Goto
Delete Device 3?
Device 3
Loop1, Address 3, Device Type Opto/thermal
Yes No
Service
FRE Off
Reset
Exit
Service
FRE Off
ResetExit
Add Zone
Add Device
Delete Zone
001 Device 1, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
005 Device 5, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
004 Device 4, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
003 Device 3, Zone 1
Loop: 1, Zone: 2, Type : Opto/thermal
002 Device 2, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
Delete Device
Touch row to delete
Goto
Delete Device 3?
Device 3
Loop1, Address 3, Device Type Opto/thermal
Yes No
Service
FRE Off
Reset
Exit
Service
FRE Off
ResetExit
Add Zone
Add Device
Delete Zone
001 Device 1, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
005 Device 5, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
004 Device 4, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
003 Device 3, Zone 1
Loop: 1, Zone: 2, Type : Opto/thermal
002 Device 2, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
Delete Device
Touch row to delete
Goto
Delete Device 3?
Device 3
Loop1, Address 3, Device Type Opto/thermal
Yes No
Service
FRE Off
Reset
Exit
Service
FRE Off
ResetExit
Add Zone
Add Device
Delete Zone
001 Device 1, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
005 Device 5, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
004 Device 4, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
003 Device 3, Zone 1
Loop: 1, Zone: 2, Type : Opto/thermal
002 Device 2, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
Delete Device