20 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 1: System installation and design
Fixing details
Read all the installation instructions before commencing with the installation.
The installation of this panel must be carried out by a suitably qualified/trained
person. The installation must comply with IEE wiring regulations and with BS5839
part 1 2002.
The electronic components within the fire panel are Static Sensitive.
Do not touch the electronics directly.
Mounting the Backbox
The Panel can be surface mounted and recessed . To surface mount; drill three holes
and fix the backbox to the wall using suitable screw fixings.
MAINS
-+-+-+ -+ABXYEABXYE
E
EF+F-
LOOP 1
S+ S- E
EF+F-
LOOP 2
S+ S-
NO NCCNONCC
LNE
AUX RELAY 1NETWORK NETWORK
+24V OUT
AUX RELAY 2
FAULT
RELAY
SOUNDER
CIRCUIT 1
SOUNDER
CIRCUIT 2
This example can be
seen again and more
clearly in Appendix
(A) System Wiring
To Next Page
Loading...
