Eaton EDR-5000 - Page 829

EDR-5000 IM02602007E
Name Description
ZI.Phase OUT Signal: Zone Interlocking Phase OUT
ZI.Phase Pickup Signal: Zone Interlocking Phase Pickup
ZI.Phase Trip Signal: Zone Interlocking Phase Trip
ZI.Pickup Signal: Pickup Zone Interlocking
ZI.Trip Signal: Zone Interlocking Trip
ZI.TripCmd Signal: Zone Interlocking Trip Command
SOTF.Active Signal: Active
SOTF.enabled Signal: Switch Onto Fault enabled. This Signal can be used to modify Overcurrent Protection Settings.
SOTF.I< Signal: No Load Current.
CLPU.detected Signal: Cold Load detected
CLPU.enabled Signal: Cold Load enabled
CLPU.ExBlo Signal: External Blocking
CLPU.ExBlo1-I Module Input State: External Blocking
CLPU.ExBlo2-I Module Input State: External Blocking
CLPU.I< Signal: No Load Current.
CLPU.Load Inrush Signal: Load Inrush
CLPU.Settle Time Signal: Settle Time
ExP[1].Alarm Signal: Alarm
ExP[1].Trip Signal: Trip
ExP[1].TripCmd Signal: Trip Command
ExP[2].Alarm Signal: Alarm
ExP[2].Trip Signal: Trip
ExP[2].TripCmd Signal: Trip Command
ExP[3].Alarm Signal: Alarm
ExP[3].Trip Signal: Trip
ExP[3].TripCmd Signal: Trip Command
ExP[4].Alarm Signal: Alarm
ExP[4].Trip Signal: Trip
ExP[4].TripCmd Signal: Trip Command
BF.Lockout Signal: Lockout
BF.Pickup Signal: BF-Module Started (Pickup)
BF.Trip Signal: Breaker Failure Trip
TCM.Not Possible Not possible because no state indicator assigned to the breaker.
TCM.Pickup Signal: Pickup Trip Circuit Supervision
CTS.Pickup Signal: Pickup Current Transformer Measuring Circuit Supervision
LOP.Pickup Signal: Pickup Loss of Potential
AR.Blo Signal: Auto Reclosure is blocked
www.eaton.com 829