Eaton EMR-4000 - Page 127

EMR-4000 IM02602009E
List of the Analog Outputs
Name Description
-.- No assignment
VT.f Measured Value: Frequency
VT.VAB RMS Measured value: Phase-to-phase voltage (RMS)
VT.VBC RMS Measured value: Phase-to-phase voltage (RMS)
VT.VCA RMS Measured value: Phase-to-phase voltage (RMS)
VT.VA RMS Measured value: Phase-to-neutral voltage (RMS)
VT.VB RMS Measured value: Phase-to-neutral voltage (RMS)
VT.VC RMS Measured value: Phase-to-neutral voltage (RMS)
VT.VX meas RMS Measured value (measured): VX measured (RMS)
VT.VR calc RMS Measured value (calculated): VR (RMS)
VT.VAB THD Measured value (calculated): VAB Total Harmonic Distortion
VT.VBC THD Measured value (calculated): VBC Total Harmonic Distortion
VT.VCA THD Measured value (calculated): VCA Total Harmonic Distortion
VT.VA THD Measured value (calculated): VA Total Harmonic Distortion
VT.VB THD Measured value (calculated): VB Total Harmonic Distortion
VT.VC THD Measured value (calculated): VC Total Harmonic Distortion
CT.IA RMS Measured value: Phase current (RMS)
CT.IB RMS Measured value: Phase current (RMS)
CT.IC RMS Measured value: Phase current (RMS)
CT.IX meas RMS Measured value (measured): IX (RMS)
CT.IR calc RMS Measured value (calculated): IR (RMS)
CT.IA THD Measured Value (Calculated): IA Total Harmonic Current
CT.IB THD Measured Value (Calculated): IB Total Harmonic Current
CT.IC THD Measured Value (Calculated): IC Total Harmonic Current
MStart.IA FLA Measured value: Phase current multiples of FLA
MStart.IB FLA Measured value: Phase current multiples of FLA
MStart.IC FLA Measured value: Phase current multiples of FLA
MStart.I3 PFLA avg Average RMS current of all 3 phases as multiples of FLA
MStart.I3P Fla Demand RMS current of all 3 phases calculated in a fixed demand window as multiples of FLA
49.I2T Used Thermal capacity used.
49.I2T Remained Thermal capacity remained.
URTD.WD1 Winding 1
URTD.WD2 Winding 2
URTD.WD3 Winding 3
URTD.WD4 Winding 4
www.eaton.com 127