Eaton Magnum DS Series - Product-Specific Information; Magnum DS Specifics

3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MAGNUM PRODUCT GUIDE CA013002EN—April 2017 www.eaton.com 17
Magnum DS - Product specific information
Magnum DS family
Standards and certifications
The Magnum DS family
(identified as a medium gray
front cover) of low voltage
power circuit breakers is ANSI
designed, tested and certified
to UL 1066. UL 1066 Listed
type DS low voltage power
circuit breakers are intended to
provide main and feeder circuit
protection in accordance with
UL1066 “Standard for Safety
for Low-Voltage AC and DC
Power Circuit Breakers Used
in Enclosures”.
UL and ANSI test
certifications
Magnum DS meets or
exceeds the applicable
ANSI, NEMA
®
, UL and CSA
®
standards, including:
•
ANSI C37.13 “Low Voltage
AC Power Circuit Breakers
Used in Enclosures”
•
ANSI C37.16 “Preferred
Ratings, Related
Requirements,
and Application
Recommendations for
Low Voltage Power Circuit
Breakers and AC Power
Circuit Breakers”
•
ANSI C37.17 “Trip Devices
for AC and General Purpose
DC Low Voltage Power
Circuit Breakers”
•
ANSI C37.50 “Test
Procedures for Low Voltage
AC Power Circuit Breakers
Used in Enclosures”
•
UL 1066 “Standard for Low
Voltage AC and DC Power
Circuit Breakers Used in
Enclosures”
•
CSA TIL No. D-34 ”Interim
Certification Requirements
for Low Voltage Power
Circuit Breakers”.
Comprehensive enclosure
solutions
Magnum DS has proven
performance in Eaton
manufactured switchgear
with the following test
certifications:
•
UL 1558 “Certified Magnum
DS Low Voltage Metal-
Enclosed Switchgear”
•
UL 1008 “Standard for
Safety Transfer Switch
Equipment”
•
C22.2 No. 31-14 Switchgear
Assemblies
Approvals and marks
•
UL listed: Magnum DS
Breaker UL File No. E52096
and Cassette UL File No.
E204565
•
ABS (American Bureau
of Shipping) Type Listed
Certificate Number
04-HS422844A-DUB
•
Additional Magnum DS
approvals and certificates
can be found on
www.eaton.com
Selection and identification of ratings
for Magnum DS
Nameplate identification
and markings
It is always advisable to be
familiar with the location
and information provided on a
breaker’s nameplate. All low
voltage power circuit breakers
must be applied within their
nameplate ratings. Nameplates
are prominently displayed
on the front of the circuit
breaker, and provide important
information relative to that
specific circuit breaker.
A Magnum DS circuit breaker
is easily identified by its
specific nameplate designation.
Review the nameplate example
provided below.
A. Low voltage power circuit
breaker family name
B. Breaker family
designation number
C. Breaker frame size in
amperes
D. Interrupting capacity
rating
E. Factory equipped
accessories
A
B
C
D
E
Courtesy of NationalSwitchgear.com