Eaton MP-4000 - Page 29

www.eaton.com Page 4-15
MP-4000 IB02602002E
Table 4-3. View Setting Mode/Program Worksheet.
SUB-
MENU
LINE # DISPLAY HELP MESSAGE SETTING RANGE/VALUE
(DEFAULT SELECTION AND
VALUE AS SHIPPED IN BOLD)
VALUE SELECTED
2 TRP ENER
or
TRP DENR
TRP ENER - ENERGIZE TRIP RELAY
TRP DENR - DE-ENERGIZE TRIP RELAY
Toggles between TRP ENER and TRP DENR
Press and hold Reset button to perform
selected test (none)
3 ALM ENER
or
ALM DENR
ALM ENER - ENERGIZE ALARM RELAY
ALM DENR - DE-ENERGIZE ALARM
RELAY
Toggles between ALM ENER AND ALM DENR
Press and hold Reset button to perform
selected test (none)
4 AX1 ENER
or
AX1 DENR
AX1 ENER - ENERGIZE AUXILIARY
RELAY 1
AX1 DENR - DE-ENERGIZE AUXILIARY
RELAY 1
Toggles between AX1 ENER and AX1 DENR
Press and hold Reset button to perform
selected test (none)
5 AX2 ENER
or
AX2 DENR
AX2 ENER - ENERGIZE AUXILIARY
RELAY 2
AX2 DENR - DE-ENERGIZE AUXILIARY
RELAY 2
Toggles between AX2 ENER and AX2 DENR
Press and hold Reset button to perform
selected test (none)
6 Choose:
AOUT 4
AOUT 12
or
AOUT 20
FORCE ANALOG OUTPUT
4 - FORCE A 4 mA OUTPUT
12 - FORCE A 12 mA OUTPUT
20 - FORCE A 20 mA OUTPUT
Toggle between AOUT 4, AOUT 12, and AOUT 20
Press and hold Reset button to output forced
value (none)
7 DI 1 OFF
or
DI 1 ON
STATE OF DISCRETE INPUT 1
Read only (none)
8 DI 2 OFF
or
DI 2 ON
STATE OF DISCRETE INPUT 2
Read only (none)
Page 14, SP RESET SETTINGS FOR RESETTING HISTORY MODE PAGES
1 MTR RST
or
PUSH RST
MTR RST - PUSH RAISE TO ENABLE
MOTOR HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF MOTOR HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to MTR RST (none)
2 TRIP RST
or
PUSH RST
TRIP RST - PUSH RAISE TO ENABLE
TRIP HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF TRIP HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset
button, or return to TRIP RST (none)
3 ALRM RST
or
PUSH RST
ALRM RST - PUSH RAISE TO ENABLE
ALARM HISTORY RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF ALARM HISTORY
OR PUSH RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to ALRM RST (none)
4 MTR2 RST
or
MTR2 PUSH
RST
MTR2 RST - PUSH RAISE TO ENABLE
MP4000 MOTOR HISTORY RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF MP4000 MOTOR
HISTORY OR PUSH RAISE TO NOT
RESET
Change to PUSH RST and press Reset button,
or return to MTR2 RST (none)
5 TRP2 RST
or
TRP2 PUSH
RST
TRP2 RST - PUSH RAISE TO ENABLE
MP4000 TRIP HISTORY RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF MP4000 TRIP
HISTORY OR PUSH RAISE TO NOT
RESET
Change to PUSH RST and press Reset button,
or return to TRP2 RST (none)
6 ALM2 RST
or
ALM2 PUSH
RST
ALM2 RST - PUSH RAISE TO ENABLE
MP4000 ALARM HISTORY RESET
PUSH RST - PUSH RESET TO
EXECUTE RESET OF MP4000 ALARM
HISTORY OR PUSH RAISE TO NOT
RESET
Change to PUSH RST and press Reset button,
or return to ALM2 RST (none)
7 TOT RST
or
PUSH RST
TOT RST - PUSH RAISE TO ENABLE
TOTAL HISTORY RESET
PUSH RST - PUSH RESET TO EXECUTE
RESET OF TOTAL HISTORY OR PUSH
RAISE TO NOT RESET
Change to PUSH RST and press Reset button,
or return to TOT RST (none)