Eaton NFX9000 - Appendix B: Communication Address Definition; Communication Protocol Mapping

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
NFX9000 Adjustable Frequency Drives
MN04002003E
For more information visit: www.EatonElectrical.com
B-1
February 2006
Appendix B — Communication Address Definition
Table B-1: Communication Address Definition
Content: Address: Function:
AMD
Parameters
Read, Write
ggnnH gg means parameter group, nn means parameter number, for example,
the address of Pr 4-01 is 0401H. Referencing to Chapter 3 for the function
of each parameter. When reading parameter by command code 03H,
only one parameter can be read at one time.
Command 2000H Bit 1,0 00: No function
01: Stop
10: Run
11: JOG+Run
Bit 2-3 Not used
Bit 5,4 00: No function
01: FWD
10: REV
11: Change direction
Bit 6-15 Not used
2001H Freq. command
2002H Bit 0 1: EF (external fault) on
Bit 1 1: Reset
Bit 2-15 Not used