Eaton Power XL DG1 Series - IO3 Board Parameters; IO3 Monitor Menu Parameters; IO3 Parameter Menu Configuration

IO3—3 x Relay Dry Contact (2NO + 1NO/NC) Option Card
PowerXL DG1 Series Option Cards MN040007EN—April 2014 www.eaton.com 23
Table 16. IO3 Parameters
Note: X is indicating that it could be in slot A or slot B, which would change the value shown.
Monitor Menu—BX.1
Code Parameter Min. Max. Default Unit ID (Slot A / Slot B) Description R / RW
BX.1.1 Relay Outputs Status 900 / 926 Relay output status indicator R
Parameter Menu—BX.2
Code Parameter Min. Max. Default Unit ID (Slot A / Slot B) Description R / RW
BX.2.1 RO1 Function Select 0 540 / 552 RO1 Function RW
BX.2.2 RO2 Function Select 0 541 / 555 RO2 Function RW
BX.2.3 RO3 Function Select 0 551 / 556 RO3 Function RW