Eaton Power XL DG1 Series - IO4 Board Parameters; IO4 Monitor Menu Parameters; IO4 Parameter Menu Configuration

IO4—3 x PT100 RTD Thermistor Input Option Card
26 PowerXL DG1 Series Option Cards MN040007EN—April 2014 www.eaton.com
IO4 Board Parameters
Figure 21. Parameter Location
Table 20. IO4 Parameters
Note: X is indicating that it could be in slot A or slot B, which would change the value shown.
Monitor Menu—BX.1
Code Parameter Min. Max. Default Unit ID (Slot A / Slot B) Description R / RW
BX.1.1 PT100 State 905 / 931 PT100 board status R
BX.1.2 PT100 Values 902 / 928 PT100 Temperature values R
Parameter Menu—BX.2
Code Parameter Min. Max. Default Unit ID (Slot A / Slot B) Description R / RW
BX.2.1 PT100 3, 2, 1 0 7 0 901 / 927 Active PT100 inputs 3, 2, 1
0: No PT100
1: 0, 0, 1 PT100 input 1 active
2: 0, 1, 0 PT100 input 2 active
3: 0, 1, 1 PT100 input 1 and input 2 active
4: 1, 0, 0 PT100 input 3 active
5: 1, 0, 1 PT100 input 3 and input 1 active
6: 1, 0, 1 PT100 input 3 and input 2 active
7: 1, 1, 1 PT100 all inputs active
Default 0
RW
BX.2.2 PT100 Warning Limit 338 / 937 Temperature warning limit value RW
BX.2.3 PT100 Fault Limit 339 / 938 Temperature fault limit value RW