INSTALLATION
Eaton 5130 Rack/Tower UPS (1000–3000 VA) User's Guide S 164201730 Rev 4
www.eaton.com/powerquality
27
5. Align each joining bracket with the adjacent cabinet screw holes
and secure with the supplied screws (see Figure 7).
NOTE Joining brackets are required for installations with two or more cabinets.
Joining Bracket
Figure 7. Installing the Joining Brackets
6. If installing additional EBMs, repeat Step 5 for each cabinet.
7. Continue to the following section, “Installing the UPS.”
To Next Page
Loading...
