7. Pull the upper batteries out and place onto a flat, stable surface.
8. Pull the lower batteries out and place onto a
flat, stable surface.
9. Remove the batteries from their cradles. See
“Recyling the Used Battery” for proper dispos-
al.
10. Install the new batteries.
11. Reinstall the trays and battery covers.
12. Reinstall the lower, then upper front covers.
8.2 Recycling the Used Battery
Contact your local recycling or hazardous waste centre for information on proper disposal of the
used battery.
WARNING
• Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper dispos-
al of batteries is required. Refer to the local codes for disposal requirements.
• Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the
skin and eyes. It may be toxic.
CAUTION
Do not discard the UPS or the UPS batteries in the trash. This product contains sealed lead-acid
batteries and must be disposed of properly. For more information, contact your local recycling or
hazardous waste centre.
20
To Next Page
Loading...
