2
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS!
This User Guide contains important instructions for your Powerware 9120 that must be followed
during installation and maintenance of the UPS and batteries.
The installation and use of this product must comply with all national, federal, state, municipal, or
local codes that apply. For assistance, call Powerware Service or your local Powerware office.
If the Powerware 9120 has been damaged during shipment, call your vendor immediately.
If the Powerware 9120 is stored, the batteries should be recharged every 6 months. If stored
above 25° Celsius, recharge the batteries more often.
CAUTION!
Whenever the Powerware 9120 is “On,” there may be dangerous voltage present at the unit’s
outlet terminals. This is because the unit’s battery supplies power even if the unit is not con-
nected to supply. The unit contains dangerous voltages.
To reduce the risk of electric shock, install in a temperature-controlled and humidity-
controlled indoor area free of conductive contaminants.
With the exception of the user-replaceable batteries, all servicing of this equipment must be
performed by qualified service personnel.
Before maintenance or repair, all connections must be removed. Before maintenance, repair,
or shipment, the unit must be completely switched off and unplugged or disconnected.
To Next Page
Loading...
