5 Error Messages
5.2 Fault History
138 DC1…20… and DC1…OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
5.2.2 Fault log
The fault log (P00-13) stores the most recent four error messages in the
order in which they occurred. The most recent error message will always be
shown as the first value when P00-13 is accessed.
To see the remaining error messages one after the other, press the (Up)
button. Their order will be indicated by the number of flashing dots on the
7-segment digital display assembly.
￫
The values in the fault log (P00-13) will not be deleted if the
variable frequency drive is reset to its default settings!
￫
In order to view parameter P00-13, you will first need to enable
access to the extended parameter set: P-14 = P-37 (default
setting: 101)
To Next Page
Loading...
