Eaton PowerXL DC1 20 Series - General Accessories (List)

7 Accessories
7.2 General accessories (List)
DC1…20… and DC1…OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com 189
7.2 General accessories (List)
Table 51: PowerXL accessories
Part no.
Description Document
DX-KEY-LED2
DX-KEY-OLED
External keypad AP040022,
IL04012020Z
DX-NET-SWD3
Interface card for connecting to a SmartWire-DT network MN04012009Z,
IL04012025Z
DX-COM-STICK3
Parameter copying stick for establishing a Bluetooth
connection to PC software or via smartphone app
MN040003,
IL04012021Z
DX-CBL-PC-3M0
Wired communication between variable frequency drive and
PC
MN040003
DX-SPL-RJ45-2SL1PL
RJ45, 8-pin, splitter, 2 sockets, 1 plug on short connection
cable
lL04012023Z
DX-SPL-RJ45-3SL
RJ45, 8-pin, splitter, 3 sockets lL04012023Z
drivesConnect PC parameter configuration software for variable frequency
drives, with integrated oscilloscope function, drive control
function, and function block creation for DA1
MN040003
￫
If you intend to use an external keypad and/or a parameter
copying stick with a DC1-…E1 variable frequency drive, please
note that only models DX-KEY-LED2 and DX-COM-STICK2 and
DX-COM-STICK3 will work.
DX-KEY-OLED can be used, but requires an update first.