4 Operational
4.6 Help cards
DC1…20… and DC1…OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com 133
4.6 Help cards
DC1 variable frequency drives come with two help cards that show the most
important control connections and parameters. This makes it possible to
quickly and easily commission the drives with their default settings when
using the rated motor output (“out-of-the-box operation”).
Figure 75:Help cards in units with an IP20
In the case of devices with an IP20 degree of protection, the help cards will
be inserted in place above the keypad.
For the devices DC1...OE1 (IP66) there is a QR Code in the cover. It links to
the Eaton website www.eaton.eu/documentation. All relevant documents
can be downloaded there.
Figure 77:QR Code
Figure 76:Help cards
L1/L
L2/N
L3
U
V
W
1
2
3
4
5
6
7
8
9
10
11
1 2
34
567
8
9
10 11
DI1: FWD
DI2: REV
DI3: FF1
+24 V/100 mA
+10 V/10 mA
AI1: f-Ref.
0 V
AO: f-Out
30 V DC/5 A
250 V AC/6 A
0 V
4.7 kΩ
0 -10 V
20 mA
DC1
DC1
U
Boost
[%]
U
Motor
[V]
P-08
I
Motor
[A]
P-09
f
Motor
[Hz]
P-01
f
max
[Hz]
P-02
f
min
[Hz]
P-11
P-07
P-03 acc [s]
Further information
available from
www.eaton.eu/documentation
To Next Page
Loading...
