Eaton PowerXL DH1 - Figure 52. FR6 Dimensional Drawing Flange Mount

90 POWERXL SERIES VFD MN040002EN—February 2018 www.eaton.com
Appendix C—Dimension Drawings
Approximate dimensions in Inches (mm)
Figure 52. FR6 Dimensional drawing flange mount
%$&.
5(6(7
OK
5(027( 581 )$8/7
/2&$/
5(0
Ă9.0
%$&.
5(6(7
OK
5(027(581)$8/7
/2&$/
5(0
Ø0.98
(Ø25.0)
A = Air gap around drive
(between drive and cabinet)
B = Space between two drives
C = Free space above drive
D = Free space below drive
Minimum Dimensions
18.90 (480.0)
0.91
(23.0)
21.25 (540.0)
20.47 (520.0)
11.02 (280.0)
Ø0.35
(Ø9.0)
2.44
(62.0)
Ø0.98
(Ø25.0)
IP21/IP54 Metric and Type 1/12 UL
D 12.99
(330.0)
C 15.75
(400.0)
A 0 (0)
B 0 (0)
31.38 (797.0)
34.04 (864.5)
6.63
(168.5)
14.61
(371.0)
0.91
(23.0)
9.84
(250.0)
9.84
(250.0)
9.84
(250.0)
36.91 (937.5)
23.73
(602.8)
3.83
(97.2)
15.75 (400.0)
15.75 (400.0)
Ø0.35
(Ø9.0)
Ø0.79
(Ø20.0)
33.27 (845.0)
3.69
(93.8)
Ø0.35
(Ø9.0)