50
PTO Operation
PTO Operation
Medium-Duty and Heavy-Duty Automated PTO Operating Instructions
AutoShift Countershaft and Split Shaft PTO Operation
Stationary PTO Operation
The transmission countershaft PTO is used in this application.
To engage the PTO for stationary operation perform the following steps:
1. Select “N” on the Shift Control.PTO Operation
2. Apply the parking brake.
3. Depress clutch fully to engage clutch brake (this stops countershaft rotation for PTO engagement).
4. Engage the PTO.
5. Release clutch pedal.
6. Raise engine speed up to operate the PTO.
Mobile PTO Operation
The Transmission countershaft PTO is used in this application and provides limited mobile operation in the start gears.
To engage the PTO for mobile operation perform the following steps:
1. Select “N” on the Shift Control.
2. Apply the parking brake.
3. Depress clutch fully to engage clutch brake (this stops countershaft rotation for PTO engagement).
4. Engage the PTO.
5. Select “D”, “MANUAL”, “Neutral” or, “Reverse”, as required for vehicle movement.
6. Release clutch pedal.
7. Raise engine speed as required to move vehicle / operate PTO.
To Next Page
Loading...
Need help?
General
