5
PTO Adapters
630 Series
• Mounts a 6-Bolt PTO to a 6-Bolt transmission opening.
• Moves the PTO down at a 30° angle, helping to eliminate interference problems.
• Uses the same input gears as the 442 and 489 Series.
• Special 630-02 adapter designed for the Fuller® UltraShift transmission. When the 8-Bolt PTO opening is
n
eeded for PTO usage, this 30° adapter allows the movement of the high capacity inertia brake from the 8-
Bolt opening to the 6-Bolt opening and rotates the high capacity inertia brake to eliminate interference
problems.
645 Series
• Mounts a 6-Bolt PTO to a 6-Bolt transmission opening.
• Moves the PTO down at a 45° angle, helping to eliminate interference problems.
• Uses the same input gears as the 442 and 489 Series.
• Same mounting hardware and spacers used to m
ount a 442 Series to a specific application.