EB TECHNOLOGY START-S1XL v2 - Programming Settings and Lights; Cancelling Working Time Programs; Fixed or Flashing Light Modes

1 Turnoffthecontrolunit
2 ConnectthecontrolunitSTARTS1XLafterawhile
3
After 5 seconds from the turning on, press the button P1 until
the LED L1 starts ashing.
4 This program cancel all previous working time programs.
5.2 Cancelation of the Working time
WARNING
This program
cancel all previous
working time
programs.
!
STARTS1XLcangobacktothestandardvalues,tocanceltheprogrammakeasfollow:
START-S1XL
Operating Guide
-13-
Keep pressed the button P1foraxedoraashinglightuntiltheLED-L1startsashingwhenthegateis
closing.
5.3 Fixed light or ashing
6 Note