(VIII)
Appendix 5
Returning Pumps for Rebuild in U.S.
In the United States, returned pump shipments must conform to Department of
Transportation regulations:
• Hermetically seal contaminated equipment in two (2) heavy gauge polyethylene bags
or equivalent.
• Tag or label equipment stating the possible hazardous material and/or the
environment in which it was used.
• Obtain an RMA number from the EBARA Service department and post on all bags,
containers, and packing list along with a copy of the Environmental Health & Safety
Clearance Form.
Failure to observe these procedures may delay the processing and rebuilding of your pump.
EBARA Corporation
To Next Page
Loading...
