EBARA E-SPD+ MT 2200 - User Manual

3
41
79
117
155
193
231
269
307
345
382
INVERTER FOR PUMPS
Instruction and maintenance manual.............................................................................................................
INVERTER PER ELETTROPOMPE
Manuale di istruzioni e manutenzione ..........................................................................................................
VARIATEUR POUR POMPES ÉLECTRIQUES
Manuel d’instructions et de maintenance .....................................................................................................
INVERTER FÜR PUMPEN
Gebrauchs - und wartungsanleitung .............................................................................................................
INVERSOR PARA BOMBAS ELÉCTRICAS
Manual de instrucciones y mantenimento ....................................................................................................
INVERTER VOOR ELEKTRISCHE POMPEN
Handleiding voor gebruik en onderhoud .......................................................................................................
INVERSOR PARA BOMBAS ELÉTRICAS
Manual de instruções e manutenção ............................................................................................................
FALOWNIK DO POMP
Instrukcja Obsługi i Konserwacji ........................................................................................................
ИНВЕРТОР ДЛЯ ЭЛЕКТРИЧЕСКИХ НАСОСОВ
Инструкция по эксплуатации и обслуживанию .........................................................................................
INVESTOR FÖR ELEKTRISKA PUMPAR
Instruktions- och underhållshandbok ............................................................................................................
TECHNICAL DATA ................................................................................................................................
SV
RU
PL
PT
NL
ES
DE
FR
IT
EN
Speed Driver
After Scanning QR code,
go to “ DOWNLOADS”
Tab to download Manual
and Set-up Video

Summary

1 - PRESENTATION

2 - INSTRUCTIONS

Provides crucial safety and handling instructions before installation and use.

3 - TECHNICAL DATA

Nominal values

Lists key technical specifications like voltage, current, power, and efficiency.

Limits of use

Specifies operating conditions like temperature, humidity, and altitude limits.

7 - INSTALLATION AND ASSEMBLY

a) Installation of the inverter

Covers general guidelines for installing the inverter, including ventilation and electrical checks.

b) Installation of pressure units with an inverter

Explains the setup for multi-pump systems and the use of pressure transducers.

8 - ELECTRICAL CONNECTIONS

Power connections

Illustrates and explains the wiring procedures for connecting power and components.

11 - OPERATION MODE

11 a) Constant pressure

Explains how the inverter operates to maintain constant pressure in single/multi-pump systems.

11 b) Differential pressure

Describes operation mode for maintaining differential pressure using sensors.

12 - START-UP WIZARD

12 a) Mode A: CONSTANT PRESSURE

Details the steps to configure the start-up wizard for constant pressure mode.

12 b) Mode B: DIFFERENTIAL PRESSURE

Explains wizard configuration for differential pressure mode with 1 or 2 sensors.

13 - SETUP MENU

A: CONSTANT PRESSURE

Lists parameters and settings for the Constant Pressure operation mode.

B: DIFFERENTIAL PRESSURE

Lists parameters and settings for the Differential Pressure operation mode.

14 - LIST OF PARAMETERS

MODE

Defines the different operating modes: Constant Pressure, Differential Pressure, Fixed Speed.

5. ADVANCED PARAMETERS

6. FINE TUNNING

Covers fine-tuning parameters like PI direction, switching frequency, and Modbus settings.

15 - MODBUS SETTINGS

4 - MODBUS PROTOCOL (INPUT REGISTERS)

Lists Modbus input registers, their addresses, parameters, and units.

16 - WARNING MANAGEMENT

EXPLANATION; SOLUTION

Provides solutions for system warnings indicated by LEDs and screen messages.

17 - ALARMS

SOLUTION(S)

Provides corrective actions and solutions for each alarm.

18 - MAINTENANCE AND REPAIR

19 - WARRANTY

Outlines the warranty terms and conditions for the product.

TECHNICAL DATA

1. HYDRAULIC INSTALLATION (CONSTANT PRESSURE)

Shows the hydraulic installation schematic for constant pressure systems.

6 - SCHEMATIC DIAGRAM (MT 2200 AND TT 4000)

7 - SCHEMATIC DIAGRAM (TT 11000)

Shows an exploded view schematic specific to the TT 11000 model.

EBARA E-SPD+ MT 2200 Specifications

General

Brand	EBARA
Model	E-SPD+ MT 2200
Category	Inverter
Language	English