EasyManua.ls Logo

EBR 1190 SX - Warranty and Maintenance; Warranty Overview

EBR 1190 SX
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Brakes Do Not Hold
1. Normally Master cylinder low on fluid. See dealer.
2. Brake line contains air bubbles. See dealer.
3. Master cylinder piston worn. See dealer.
4. Brake pads contaminated with grease or oil. See
Dealer.
5. Brake pads badly worn. See dealer.
6. Brake discs badly worn or warped. See dealer
7. Brake fades because of heat build up. Excessive
braking or pads dragging. See dealer.
8. Brake drags. Insufficient hand lever free play. See
dealer.
COOLING SYSTEM
Overheats
1. Air flow through the radiator is obstructed.
2. The radiator is internally plugged.
3. Insufficient coolant.
4. Cooling fans not operating.
5. Thermostat stuck closed.
WARRANTY AND MAINTENANCE
See Regular Service Intervals. This Owner’s Manual contains
your new motorcycle warranty and a maintenance record.
The maintenance record is a scheduled mileage interval that
contains a specific maintenance checklist for upkeep of your
motorcycle. It is the owners responsibility to follow the
scheduled mileage intervals as specified. All of the specified
maintenance services must be performed to keep your
warranty valid.
1. Make an appointment with an EBR dealer for
inspection and service prior to first 620 miles (1000 km).
2. Bring this Owner’s manual with you when you visit
the dealer to have your motorcycle inspected and serviced.
3. Have the owner record stubs dated and signed for
required proof of service during the warranty period.
4. Keep receipts covering any parts, service or
maintenance performed.
122

Table of Contents