Lamps can be turned on to increase the motorcycle’s visibility
to other motorists while parked.
See Figure 5. When the ignition switch is in the PARKING
LAMP position, the running lamps, tail lamps, and instrument
cluster are illuminated. The front and rear turn signals can
also be activated.
1. Turn handlebars full left.
2. Turn the key counterclockwise to the PARKING LAMP
position to turn on the parking lamps. Key may be removed.
To lock the steering head.
1. Turn the handlebars full left
2. Turn the key counterclockwise to the LOCK position.
Key may be removed.
See Figure 7. The electric starter switch is located on the right
hand controls. Pushing in the electric starter switch engages
the electric starter and starts the engine if ignition power is
35
To Next Page
Loading...