LX20B – Manual Page 48 / 67
7.7.2. GPRS
Activate this function to (mark [Turn On] field) to get access to parameters
determining action of device if GPRS connections is lost.
Define time limit after which transmitter shall reconnect to network. Enter time limit
in field [Reset after] and provide this value in minutes.
Next define action that the device shall perform. Select action by marking proper
square next action description:
o Modem reset
o Device reset
o Turn on output 1 (OUT1)
o Turn on output 2 (OUT2)
In case of no connection with GPRS network the device after recognizing the
situation shall wait during provided time limit and then shall perform programmed
actions.
7.8. RS232
To Next Page
Loading...
