LX20B – Manual Page 56 / 67
7.12. EVENTS HISTORY
„Events history” provides information about last events stored in device memory.
LX20B transmitter is able to save at least 5000 events. It is possible to read the
history using a GPRS connection or RS232. In the second case, data can be send
to PC only via GD-PROG cable (the switch in position PROG) or SP-PROG
programmer. Correct RS232 port or GPRS connection must be chosen in “Choose
connection kind” field. After providing Service code and clicking “Open” button
events data will be downloaded from LX20B memory. After properly reading
access to features such as the "Filtering" and "Charts" becomes possible. Both of
them may be used to quickly diagnose the device.
To Next Page
Loading...
