EBS LX20B - Page 55

LX20B – Manual Page 55 / 67
“Device Monitor” provides real-time information about device state. To use this
function device must be connected to PC computer with GD-PROG cable (the switch
in position DEBUG) or SP-PROG programmer. Correct RS232 port must be chosen in
“Port” field.
“Device monitor” provides following information:
 AC power indication
 Battery power indication
 PSTN line indication
 GSM network signal level indication
 Bit-Error-Rate level measuring
 Inputs and outputs state monitoring
 Type or serial number of device
 Firmware and hardware revision
 Device time
These parameters are also shown in LOG window in text style. All data can be saved
to file.