Need help?Do you have a question about the EBS EPX400 and is the answer not in the manual?
General| Frequency Range | 470-862 MHz |
|---|---|
| Output Power | 400 W |
| Cooling System | Forced air cooling |
| Modulation | DVB-T/T2, ISDB-T |
| Input Voltage | 50/60 Hz |
Illustrates the EPX400 transmitter's components and terminal connections.
Describes the option to purchase and connect the transmitter's PCB directly.
Explains how to configure the device's input lines (NO/NC, EOL, DEOL).
Explains how to access the device's web interface by setting IP addresses.
Shows how to view device type and serial number via the web interface.
Describes the web interface for configuring server and APN parameters.
Provides notes on downloading and installing the configuration software.
Lists the necessary hardware and software for the configuration PC.
Outlines the main features and menu options of the configuration software.
Details security settings for accessing the transmitter and SIM card.
Explains AES encryption options for secure data transmission.
Describes configuration for the device's inputs and outputs.
Allows selection of events to be reported to the monitoring station.
Defines restrictions on incoming SMS and data calls.
Configures SMS alerts to private phone numbers.
Details serial port settings for RS232 communication.
Manages automatic reactions to connection loss.
Settings for PSTN line integration and DTMF communication.
Explains the process for updating the device's firmware.
Provides real-time monitoring of the device's state.
Allows viewing and analyzing stored event logs.
Describes the procedure for programming the device via a direct connection.
Explains how to program the device remotely using GPRS or CSD.
Lists and explains commands that can be sent via SMS for device control.
Describes LED indication during GSM network connection.
Explains LED indication for GSM signal strength.
Describes LED indication during data transmission.
Explains LED indication for DTMF data reception.
Describes LED indication during programming mode.
Explains LED indication during firmware update process.
Describes LED indication for SIM card issues.
Explains LED indication for general system errors.
To Next Page
