Exit from Sleep mode occurs when one of the following situations takes place:
Main power supply is connected and the battery voltage exceeded a value of
“threshold of sleep” + 0.6 V
Overall disconnect power and re-connect the battery and/or AC power
For transmitter inputs are reported only changes in relation to the state before sleep.
8.5. RESTRICTIONS
8.5.1. SMS and data calls (CSD)
In this section, you can define the restriction for the phone numbers from which
incoming data calls and SMS commands are received. You can also specify SMS
validity period and outgoing SMS limits.
8.5.1.1. SMS authorized phones
User may restrict remote access to the device (via SMS) for determined phone
numbers. A list of numbers (up to 5 numbers) determines which numbers are
allowed to connect with transmitter.
Available options:
o Deny all: means no available telephone communication.
o Allow all: means that telephone communication is possible from any phone.
To Next Page
Loading...
