8.4. MONITORING
Thanks to this option you may determine which of available events generated by the
device shall be transmitted to monitoring station.
NOTE: “Configuration changed” event refer to configuration changes made
by SMS or GPRS commands.
8.4.1. Ethernet
In this columns you define events that are to be reported to monitoring station with
Ethernet transmission. There is possibility to send information on alarms (violation of
input) and on returns of inputs state to normal (inactive) state. To transmit any
event you should only click it (proper square on your right).
Click on [Clear] button to remove all marked events.
Click on [Invert] button to change markings to contrary.
8.4.2. GPRS
In this columns you define events that are to be reported to monitoring station with
GPRS transmission. There is possibility to send information on alarms (violation of
input) and on returns of inputs state to normal (inactive) state. To transmit any
event you should only click it (proper square on your right).
Click on [Clear] button to remove all marked events.
Click on [Invert] button to change markings to contrary.
To Next Page
Loading...
