7. PROGRAMMABLE PARAMETERS
Parameters available in configuration program are divided into groups:
Access, Transmission, Inputs/ Outputs, Monitoring, Restrictions, SMS Notifications,
Link control, RS-232, Phone line, Dialer and Firmware. Each of these groups will be
described in detail in next part of this manual.
7.1. ACCESS
7.1.1. Parameters
7.1.1.1. Device mode
Depending of user preferences, a device may operate in 1 out 3 modes (available
from scrolled list):
o GPRS & SMS: GPRS standard transmission (TCP/IP Protocol), and if any
problems follow with this link it automatically SMS mode will follow.
o SMS: Transmission only in SMS mode, without trial to establish GPRS link.
o GPRS: GPRS standard transmission (TCP/IP Protocol), and in case of any
problems with this link no transmission will follow.
o Serverless: no transmission to the server is possible, remote communication
possible only via SMS notifications to the user or dialer
To Next Page
Loading...
