7.10.1. General options
These options allows configuration of Dialler of LX20G device. It is possible to
completely turn off Dialler or to enable communications with one or two receiving
stations. Communication parameters can be defined with following options:
o Number – receiving station telephone number
o Test period – user can enable periodical communication tests between
LX20G device and receiver station; time period is in minutes
o Number of attempts – defines number of attempts of sending each event
when first try fails
o Delay between unsuccessful attempts – defines time period between
following attempts of sending event to the receiving station
o Period of inactivity after number of attempts goes beyond the limit –
defines time period of inactivity in communication with receiving station when
“Number of attempts” parameter is exceeded.
To Next Page
Loading...
