7.4. MONITORING
Thanks to this option you may determine which of available signals generated by
the device shall be transmitted to monitoring station.
NOTE: “Configuration changed” event refer to configuration changes made
by SMS or GPRS commands.
7.4.1. The use of non-volatile memory of the own events
This setting protects the memory of the own events before deleting eg. if restart or
power loss.
If you select “Enable non-volatile events FIFO” causes:
o Nothing event generated by the device should not be lost.
o All of the events are reported to the OSM Server with the time stamp with
resolution of 10msec.
o All events are sent to the Server chronologically.
o Command FLUSH=0, deletes only the events stored in the non-volatile
memory and generates the event EVENT_FIFO_FLUSHED.
o The function skip the initial states does not work.
o The function of limiting the number of sent SMS can not give large benefits.
If you don’t choose “Enable non-volatile events FIFO”:
o Restart of the transmiter causes the loss of all unsent events. Events that will
not be lost:
To Next Page
Loading...
