7.7.2. GPRS
Activate this function to (mark [Turn On] field) to get access to parameters
determining action of device if GPRS connections is lost.
Define time limit after which transmitter shall reconnect to network. Enter time
limit in field [Reset after] and provide this value in minutes.
Next define action that the device shall perform. Select action by marking proper
square next action description:
o Modem Reset
o Device Reset
o Turn on sabotage output
o Turn on auxiliary output 1 or 2
In case of no connection with GPRS network the device after recognizing the
situation shall wait during provided time limit and then shall perform programmed
actions.
To Next Page
Loading...
