EBS LX20G - SMS NOTIFICATIONS; Notification Phone Numbers

LX20G_Manual_en_v2.1
Page 39 /
69
 Allow all: means that incoming GSM voice calls are possible from any phone.
 Allow chosen: means that incoming GSM voice calls are possible only from these
numbers that are on the list. It is possible to list up to 5 phone numbers.
Select “Allow chosen” to get access to edition window. Enter another numbers and
click on [Add] button to send them to the below table. Position cursor on line with
number and click on “Remove” to remove number from table.
Click on “Remove all” to remove all numbers from table.
Note: authorizing of incoming GSM voice call comes through comparing of number
from which it was sent with numbers from table. It is allowable to enter only a part
of number e.g. 1234. As a result all numbers with this sequence will be authorized
e.g.600123456 or 601234567.
7.5.2.2. The numbers of outgoing GSM voice calls
For outgoing GSM voice calls the user may limit access from device to other phone
numbers. Only numbers on the list (up to 5) allow for communication with
transmitter.
Available options:
 Deny all: means outgoing GSM voice calls are not allowed.
 Allow all: means that outgoing GSM voice calls are possible to any phone.
 Allow chosen: means that outgoing GSM voice calls are possible only to these
numbers that are on the list. It is possible to list up to 5 phone numbers.
Select “Allow chosen” to get access to edition window. Enter another numbers and
click on [Add] button to send them to the below table. Position cursor on line with
number and click on “Remove” to remove number from table.
Click on “Remove all” to remove all numbers from table.
Note: authorizing of outgoing GSM voice call comes through comparing of number
from which it was sent with numbers from table. It is allowable to enter only a part
of number e.g. 1234. As a result all numbers with this sequence will be authorized
e.g.600123456 or 601234567.
7.6. SMS NOTIFICATIONS
User may define messages that in case of any event (e.g. input state change) will
be sent to private phone numbers. At the same time it is worth to remember about
limitation in this respect.
7.6.1. Phone numbers
One way to limit amount of sent information (by SMS) is to define a list of 5 private
phone numbers. This list means that only telephones listed on it will receive
messages sent by transmitter.
To edit you shall follow this procedure:
o Enter due telephone number into edition field.