EBS LX2NB - Operations->Restore Default Settings; Operations->System Events History; Operations->Device Monitor; Help->About Program

LX2NB Manual v.1.9 Page 23 / 60
6.2.10. Operations->Restore default settings
If operation “Read” finishes with error message (e.g. if access code is unknown) it is
possible to come back to default settings by selecting “Restore default settings”. e
“Do you want to overwrite current configuration with default values?”. After
confirming the following window shall appear:
This operation is possible only with local connection. After operation completing
device parameters shall come back to default settings.
6.2.11. Operations->System events history
„Events history” provides information about last events stored in LX device memory.
See chapter 7.11.
6.2.12. Operations->Device monitor
“Device Monitor” provides real-time information on LX device state. See chapter
7.10.
6.2.13. Help->About program
Select this information to view additional information about program.