LX2NB Manual v.1.9 Page 45 / 60
7.7.2. GPRS
Activate this function to (mark [Turn On] field) to get access to parameters
determining action of device if GPRS connections is lost.
Define time limit after which transmitter shall reconnect to network. Enter time limit
in field [Reset after] and provide this value in minutes.
Next define action that the device shall perform. Select action by marking proper
square next action description:
o Modem reset
o Device reset
o Turn on output
In case of no connection with GPRS network the device after recognizing the
situation shall wait during provided time limit and then shall perform programmed
actions.
7.8. PHONE LINE
The device is equipped with simulated PSTN phone line, which may collect
information from an control panel using its a phone communicator, and next
transmit them via GPRS or SMS. The mentioned below parameters shall be defined
for proper operation of the device.
To Next Page
Loading...
