LX2NB Manual v.1.9 Page 48 / 60
Note:
For all protocols you may use following options:
o [Enable SMS sending] which means that in case of no GPRS connection,
data will be sent via SMS (if this mode will be accessible).
o [Disable CRC checking] Some control panel generate improper messages
regarding a control sum for transmitted data, the device is not able to
confirm collection of data, and as a result the panel tries to send them
again (until execution of all determined trials). Select this option to avoid
the above mentioned.
7.9. FIRMWARE
The device is equipped with built in bootloader that allow for updating and change of
firmware. During programming all information is displayed in respect of carried out
operation.
To Next Page
Loading...
