LX2NB Manual v.1.9 Page 17 / 60
6. CONFIGURATION PROGRAM
6.1. INITIAL REMARKS
GPRS transmitters configurator may be downloaded at www.ebs.pl (login: ebs,
password: ebs)
To install program an installation wizard shall be started that performs installation
in default place C:\Program Files\EBS\. During installation process shortcuts on
screen and Windows menu may be created.
If device is to be used for the first time it shall be programmed with the
above program and after this procedure the SIM card may be inserted into the
device. Otherwise SIM card may be blocked if wrong PIN code is entered.
Alternatively SIM card may be used along with switched off PIN code.
In case of remote programming it is necessary to insert SIM card prior to
sending configuration settings. In this situation SIM card with switched off PIN code
shall be used or before card inserting, PIN code shall be changed with mobile phone.
6.2. COMPUTER – REQUIREMENTS
Minimum requirements for computer system where configuration software
(Configurator from 1.3.69.022 version) is to be installed are the following:
Hardware:
Processor 1GHz or faster,
1 GB RAM,
4GB HDD,
Software:
Operating system: Windows 7 or newer,
.NET Framework 4,5 software
PROGRAM FUNCTIONS
After installation and program starting a main view shall be displayed on screen.
Thanks to this view an access to program or programmable parameters of device is
possible (See chapter 7)
Main window of program is divided into some fields.
Main menu: at upper part of window, contains control and configuration options.
Main menu contents:
To Next Page
Loading...
