EBS LX2NB - Programming; Firmware Updating; Sim Card Error

LX2NB Manual v.1.9 Page 58 / 60
SMS
Transmission
10.4. PROGRAMMING
After detection of programming wire diodes indicate programming.
Description
LED Diodes
Green
Red
Connected
Service
wire
Programming
in CSD mode
10.5. FIRMWARE UPDATING
During programming bootlader operating is indicated. If error follows during
updating there is bootloader in device and another programming of device is
possible.
Description
LED Diodes
Green
Red
No program in
device
(1/sec)
Software updating
Received firmware
decoding
10 sec
10.6. SIM CARD ERROR
In case of SIM card problems, device states this with OK and ERROR LEDs
LED diode
Signalling