LX2NB Manual v.1.9 Page 51 / 60
„Events history” provides information about last events stored in LX device
memory. LX transmitter is able to save about 5000 events. It is possible to read
the history of both using a GPRS connection and RS232. In the second case data
can be send to PC only via GD-PROG cable (in data mode). Correct RS232 port
or GPRS connection must be chosen in “Choose connection kind” field. After
providing Service code and clicking “Open” button events data will be
downloaded from LX memory. After properly reading access to features such as
the "Filtering" and "Charts" becomes possible. Both of them may be used to
quickly diagnose the device.
To Next Page
Loading...
