34
3
Before installing the nal end lens(es), attach the other light
blocking bafe that is included with the module to the lens
that will be joined to the center illumination lens.
Light blocking bafe
Center Illumination Module
EZ1411
NOTE
Maximum lettering height is 1.5”/38mm. Vinyl lettering is not available from ECCO. A strip of red vinyl is included that can be applied to
the inside rear of the center illumination lens, for use where regulations restrict the use of white light to the rear of the vehicle.
Apply power to the lightbar. The center of the lightbar
should be permanently illuminated whenever power is
applied.
To Next Page
Loading...
