Ecolab LMIT09/S209 - Metering Media Safety

Recommended applications:
Application Version LMIT09 Measurement range [mS/cm]
Standard Pharma PROFIBUS
0 à 0.2 à 2 à 20 à 200 à 2000
Cleaning/Disinfection
Concentration monitoring:
n
Bottle cleaning
l l l l l
n CIP
l l l l l l l
n Box cleaning
l l l l l
n Keg cleaning
l l l l l
Phase separation:
n CIP
l l l l l l
Food production
Product phase separation
l l l l l l
Product monitoring:
l l l l
<Beer
l l l l
<Milk
l l l l
<Fruit juices
l l l l l
<Soft drinks
l l l l l
<Mineral water
l l l l
Pharma production
Concentration monitoring:
<CIP
l l l l l l
<Production monitoring
l l l l l l
Phase separation:
<CIP
l l l l l l l l
<Final rinse
l l l l
<Demineralised water
l l l
Water treatment
Spring water monitoring
l l l
Process water monitoring
l l l
Cooling water monitoring
l l l
Feed water monitoring
l l
Waste water monitoring
l l l l l
Tank bottom recovery
l l l l
2.3 Metering media
CAUTION!
Use of dosing media:
–
The LMIT09 may be used only with products validated by Ecolab.
Liability is not accepted if invalidated products are used!
– The dosing media are procured by the operator.
– The owner will bear sole responsibility for correct handling and the
associated risks.
– Hazard warnings and disposal instructions must be provided by the
owner/operator.
– When handling the dosing medium, always use suitable protective
clothing (see the material safety data sheet for the dosing medium).
– All safety regulations must be followed and the information contained in
the material safety data sheet/product data sheet must be observed.
Safety
10417101558 Rev. 06-06.2021